Work on Python buildbots, 2017 Q2

I spent the last 6 months on working on buildbots: reduce the failure rate, send email notitication on failure, fix random bugs, detect more bugs using warnings, backport fixes to older branches, etc. I decided to fix all buildbots issues: fix all warnings and all unstable tests!

The good news is that I made great progress, I fixed most random failures. A random fail now became the exception rather than the norm. Some issues were not bugs in tests, but real race conditions in the code. It's always good to fix unlikely race conditions before users hit them on production!

  • Introduction: Python Buildbots
  • Orange Is The New Color
  • New buildbot-status Mailing List
  • Hardware issues
    • The vacuum cleaner
    • The memory stick
  • Warnings
  • regrtest
  • Bug fixes
  • Python 2.7
  • Buildbot reports to python-dev

Introduction: Python Buildbots

CPython is running a Buildbot server for continuous integration, but tests are run as post-commit: see Python buildbots. CPython is tested by a wide range of buildbot slaves:

  • 6 operating systems:
    • Linux (Debian, Ubuntu, Gentoo, RHEL, SLES)
    • Windows (7, 8, 8.1 and 10)
    • macOS (Tiger, El Capitain, Sierra)
    • FreeBSD (9, 10, CURRENT)
    • AIX
    • OpenIndiana (currently offline)
  • 5 CPU architectures:
    • ARMv7
    • x86 (Intel 32 bit)
    • x86-64 aka "AMD64" (Intel 64-bit)
    • PPC64, PPC64LE
    • s390x
  • 3 C compilers:
    • GCC
    • Clang (FreeBSD, macOS)
    • Visual Studio (Windows)

There are different kinds of tests:

  • Python test suite: the most common check
  • Docs: check that the documentation can be build and doesn't contain warnings
  • Refleaks: check for reference leaks and memory leaks, run the Python test suite with the --huntrleaks option
  • DMG: Build the macOS installer with the Mac/BuildScript/ script

Python is tested in different configurations:

  • Debug: ./configure --with-pydebug, the most common configuration
  • Non-debug: release mode, with compiler optimizations
  • PGO: Profiled Guided Optimization, ./configure --enable-optimizations
  • Installed: ./configure --prefix=XXX && make install
  • Shared library (libpython): ./configure --enable-shared

Currently, 4 branches are tested:

  • master: called "3.x" on buildbots
  • 3.6
  • 3.5
  • 2.7

There is also custom, a special branch used by core developers for testing patches.

The buildbot configuration can be found in the buildmaster-config project (start with the master/master.cfg file).

Note: Thanks to the migration to GitHub, Pull Requests are now tested on Linux, Windows and macOS by Travis CI and AppVeyor. It's the first time in the CPython development history that we have automated pre-commit tests!

Orange Is The New Color

A buildbot now becomes orange when tests contain warnings.

My first change was to modify the buildbot configuration to extract warnings from the raw test output to create a new "warnings" report, to more easily detect warnings and tests failing randomly (test fail then pass when re-run).

Example of orange build, x86-64 El Capitain 3.x:

Buildbot: orange build

Extract of the current master/custom/

class Test(BaseTest):
    # Regular expression used to catch warnings, errors and bugs
    warningPattern = (
        # regrtest saved_test_environment warning:
        # Warning -- files was modified by test_distutils
        # @reap_threads:
        # Warning -- threading_cleanup() failed to cleanup ...
        r"Warning -- ",
        # Py_FatalError() call
        r"Fatal Python error:",
        # PyErr_WriteUnraisable() exception: usually, error in
        # garbage collector or destructor
        r"Exception ignored in:",
        # faulthandler_exc_handler(): Windows exception handler installed with
        # AddVectoredExceptionHandler() by faulthandler.enable()
        r"Windows fatal exception:",
        # Resource warning: unclosed file, socket, etc.
        # NOTE: match the "ResourceWarning" anywhere, not only at the start
        # regrtest: At least one test failed. Log a warning even if the test
        # passed on the second try, to notify that a test is unstable.
        r'Re-running failed tests in verbose mode',
        # Re-running test 'test_multiprocessing_fork' in verbose mode
        r'Re-running test .* in verbose mode',
        # Thread last resort exception handler in t_bootstrap()
        r'Unhandled exception in thread started by ',
        # test_os leaked [6, 6, 6] memory blocks, sum=18,
        r'test_[^ ]+ leaked ',
    # Use ".*" prefix to search the regex anywhere since stdout is mixed
    # with stderr, so warnings are not always written at the start
    # of a line. The log consumer calls warningPattern.match(line)
    warningPattern = r".*(?:%s)" % "|".join(warningPattern)
    warningPattern = re.compile(warningPattern)

    # if tests have warnings, mark the overall build as WARNINGS (orange)
    warnOnWarnings = True

New buildbot-status Mailing List

To check buildbots, previously I had to analyze manually the huge "waterfall" view of four Python branches: 2.7, 3.5, 3.6 and master ("3.x").

Example of typical buildbot waterfall:

Buildbot waterfall

The screenshot is obviously truncated since the webpage is giant: I have to scroll in all directions... It's not convenient to check the status of all builds, detect random failures, etc.

We also have an IRC bot reporting buildbot failures: when a green (success) or orange (warning) buildbot becomes red (failure). I wanted to have the same thing, but by email. Technically, it's trivial to enable email notification, but I never did it because buildbots were simply too unstable: most failures were not related to the newly tested changes.

But I decided to fix all buildbots issues, so I enabled email notification (bpo-30325). Since May 2017, buildbots are now sending notifications to a new buildbot-status mailing list.

I use the mailing list to check if the failure is known or not: I try to answer to all failure notification emails. If the failure is known, I copy the link to the issue. Otherwise, I create a new issue and then copy the link to the new issue.

Hardware issues

Unit tests versus real life :-) (or "software versus hardware")

The vacuum cleaner

Fixing buildbot issues can be boring sometimes, so let's start with a funny bug. At June 25, Nick Coghlan wrote to the python-buildbots mailing list:

It looks like the FreeBSD buildbots had an outage a little while ago, and the FreeBSD 10 one may need a nudge to get back online (the FreeBSD Current one looks like it came back automatically).

The reason is unexpected :-) Kubilay Kocak, owner of the buildbot, answered:

Vacuum cleaner tripped RCD pulling too much current from the same circuit as heater was running on. Buildbot worker host on same circuit.

The memory stick

I opened at least 50 issues to report random buildbot failures. In the middle of these issues, you can find bpo-30371:

FAIL: test_long_lines (test.test_email.test_email.TestFeedParsers)
Traceback (most recent call last):
  File "C:\\3.x.kloth-win64\build\lib\test\test_email\", line 3526, in test_long_lines
    self.assertEqual(m.get_payload(), 'x'*M*N)
AssertionError: 'xxxx[17103482 chars]xxxxxzxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx[2896464 chars]xxxx' != 'xxxx[17103482 chars]xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx[2896464 chars]xxxx'

Notice the "z" in "...xxxxxz...".


New fail, same buildbot:

FAIL: test_long_lines (test.test_email.test_email.TestFeedParsers)
Traceback (most recent call last):
  File "C:\\3.x.kloth-win64\build\lib\test\test_email\", line 3534, in test_long_lines
    self.assertEqual(m.items(), [('a', ''), ('b', 'x'*M*N)])
AssertionError: Lists differ: [('a'[1845894 chars]xxxxxzxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx[18154072 chars]xx')] != [('a'[1845894 chars]xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx[18154072 chars]xx')]

First differing element 1:
('b',[1845882 chars]xxxxxzxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx[18154071 chars]xxx')
('b',[1845882 chars]xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx[18154071 chars]xxx')

  [('a', ''),

Don't click on
: the log contains lines of 2 MB which make my Firefox super slow :-)

Jeremy Kloth, owner the buildbot, answered:

Watch this space, but I'm pretty sure that it is (was) bad memory.

He fixed the issue:

That's the real problem, I'm not sure it's the memory, but it does have the symptoms. And that is why my buildbot was down earlier, I was attempting to determine the bad stick and replace it.


To fix test warnings, I enhanced the test suite to report more information when a warning is emitted and to ease detection of failures.

A major change is the new --fail-env-changed option I added to regrtest (bpo-30764): make tests fail if the "environment" is changed. This option is now used on buildbots, Travis CI and AppVeyor, but only for the master branch yet.

Other changes:

  • The @reap_threads decorator and the threading_cleanup() function of now log a warning if they fail to clenaup threads. The log may help to debug such other warning seen on the AMD64 FreeBSD CURRENT Non-Debug 3.x buildbot: "Warning -- threading._dangling was modified by test_logging".
  • threading_cleanup() failure marks test as ENV_CHANGED. If threading_cleanup() fails to cleanup threads, set a a new support.environment_altered flag to true, flag uses by save_env which is used by regrtest to check if a test altered the environment. At the end, the test file fails with ENV_CHANGED instead of SUCCESS, to report that it altered the environment.
  • regrtest: always show before/after values of modified environment.

I backported all these changes to the 2.7, 3.5 and 3.6 branches to make sure that warnings are fixed in all maintained branches.


As usual, I spent time our specialized test runner, regrtest:

  • bpo-30263: regrtest: log system load and the number of CPUs. I tried to find a relationship between race conditions and the system load. I failed to find any obvious correlation yet, but I still consider that the system load is useful.
  • bpo-27103: regrtest disables -W if -R (reference hunting) is used. Workaround for a regrtest bug.

But the most complex task was to backport all regrtest features and enhancements from master to regrtest of 3.6, 3.5 and then 2.7 branches.

In Python 3.6, I rewrote file to split it into smaller files a in new Lib/test/libregrtest/ library, so it was painful to backport changes to 3.5 (bpo-30383) which still uses the single file.

In Python 2.7 (bpo-30283), it is even worse. Lib/test/ uses the old getopt module to parse the command line instead of the new argparse used in 3.5 and newer. But I succeeded to backport all features and enhancements from master!

Python 2.7, 3.5, 3.6 and master now have almost the same CLI for python -m test, almost the same features (except of one or two missing feature), and should provide the same level of information on failures and warnings.

By the way, the new test.bisect tool is now also available in all these branches. See my New Python test.bisect tool article.

Bug fixes

As expected, the longest section here is the list of changes I wrote to fix all buildbot failures and warnings:

  • bpo-29972: Skip tests known to fail on AIX. See [Python-Dev] Fix or drop AIX buildbot? email.
  • bpo-29925: Skip test_uuid1_safe() on OS X Tiger
  • Fix and optimize test_asyncore.test_quick_connect(). Don't use addCleanup() in test_quick_connect() because it keeps the Thread object alive and so @reap_threads times out after 1 second. "./python -m test -v test_asyncore -m test_quick_connect" now takes 185 ms, instead of 11 seconds.
  • bpo-30106: Fix test_asyncore.test_quick_connect(). test_quick_connect() runs a thread up to 50 seconds, whereas the socket is connected in 0.2 second and then the thread is expected to end in less than 3 second. On Linux, the thread ends quickly because select() seems to always return quickly. On FreeBSD, sometimes select() fails with timeout and so the thread runs much longer than expected. Fix the thread timeout to fix a race condition in the test.
  • bpo-30106: Fix tearDown() of test_asyncore. Call asyncore.close_all() with ignore_all=True in the tearDown() method of the test_asyncore base test case. It prevents keeping alive sockets in asyncore.socket_map if close() fails with an unexpected error.
  • bpo-30108: Restore sys.path in test_site. Add setUpModule() and tearDownModule() functions to test_site to save/restore sys.path at the module level to prevent warning if the user site directory is created, since site.addsitedir() modifies sys.path.
  • bpo-30107: test_io doesn't dump a core file on an expected crash anymore. test_io has two unit tests which trigger a deadlock: test_daemon_threads_shutdown_stdout_deadlock() and test_daemon_threads_shutdown_stderr_deadlock(). These tests call Py_FatalError() if the expected bug is triggered which calls abort(). Use to prevent the creation on a core dump, to fix the warning: Warning -- files was modified by test_io (...) After: ['python.core']
  • bpo-30125: Disable faulthandler to run test_SEH() of test_ctypes to prevent the following log with a traceback: Windows fatal exception: access violation
  • bpo-30131: test_logging cleans up threads using @support.reap_threads.
  • bpo-30132: BuildExtTestCase of test_distutils now uses support.temp_cwd() in setUp() to remove files created in the current working directory by BuildExtTestCase unit tests.
  • bpo-30107: On macOS, now redirects /usr/bin/defaults command stderr into a pipe to not pollute stderr. It fixes a test_io.test_daemon_threads_shutdown_stderr_deadlock() failure when the CrashReporter domain doesn't exists.
  • bpo-30175: Skip client cert tests of test_imaplib. The IMAP server doesn't accept our randomly generated client x509 certificate anymore.
  • bpo-30175: test_nntplib fails randomly with EOFError in NetworkedNNTPTests.setUpClass(): catch EOFError to skip tests in that case.
  • bpo-30199: AsyncoreEchoServer of test_ssl now calls asyncore.close_all(ignore_all=True) to ensure that asyncore.socket_map is cleared once the test completes, even if ConnectionHandler was not correctly unregistered. Fix the following warning: Warning -- asyncore.socket_map was modified by test_ssl.
  • Fix test_ftplib warning if IPv6 is not available. DummyFTPServer now calls del_channel() on bind() error to prevent the following warning in TestIPv6Environment.setUpClass(): Warning -- asyncore.socket_map was modified by test_ftplib
  • bpo-30329: Catch Windows error 10022 on shutdown(). Catch the Windows socket WSAEINVAL error (code 10022) in imaplib and poplib on shutdown(SHUT_RDWR): An invalid operation was attempted. This error occurs sometimes on SSL connections.
  • bpo-30357: test_thread now uses threading_cleanup(). test_thread: setUp() now uses support.threading_setup() and support.threading_cleanup() to wait until threads complete to avoid random side effects on following tests. Co-Authored-By: Grzegorz Grzywacz.
  • bpo-30339: test_multiprocessing_main_handling timeout. test_multiprocessing_main_handling: increase the test_source timeout from 10 seconds to 60 seconds, since the test fails randomly on busy buildbots. Sadly, this change wasn't enough to fix buildbots.
  • bpo-30387: Fix warning in test_threading. test_is_alive_after_fork() now joins directly the thread to avoid the following warning added by bpo-30357: "Warning -- threading_cleanup() failed to cleanup 0 threads after 2 sec (count: 0, dangling: 21)". Use also a different exit code to catch generic exit code 1.
  • bpo-30649: On Windows, test_os now tolerates a delta of 50 ms instead of 20 ms in test_utime_current() and test_utime_current_old(). On other platforms, reduce the delta from 20 ms to 10 ms. PPC64 Fedora 3.x buildbot requires at least a delta of 14 ms.
  • bpo-30595: test_queue_feeder_donot_stop_onexc() of _test_multiprocessing now uses a timeout of 1 second on Queue.get(), instead of 0.1 second, for slow buildbots.
  • bpo-30764, bpo-29335: test_child_terminated_in_stopped_state() of test_subprocess now uses support.SuppressCrashReport() to prevent the creation of a core dump on FreeBSD.
  • bpo-30280: TestBaseSelectorEventLoop of test.test_asyncio.test_selector_events now correctly closes the event loop: cleanup its executor to not leak threads: don't override the close() method of the event loop, only override the_close_self_pipe() method. asyncio base TestCase now uses threading_setup() and threading_cleanup() of to cleanup threads.
  • bpo-26568, bpo-30812: Fix test_showwarnmsg_missing(): restore the attribute after removing it.

Python 2.7

I wanted to fix all buildbot issues of all branches including 2.7, whereas I didn't touch much the Python 2.7 code base last months (last years???). The first six months of 2017, I backported dozens of commits from master to 2.7!

For example, I added AppVeyor on 2.7: a Windows CI for GitHub!

On Windows we support multiple versions of Visual Studio. I use Visual Studio 2008, whereas most 2.7 Windows buildbots use Visual Studio 2010 or newer. I fixed sysconfig.is_python_build() if Python is built with Visual Studio 2008 (VS 9.0) (bpo-30342).

Other Python 2.7 changes:

  • Fix "make tags" command.
  • bpo-30764: support.SuppressCrashReport backported to 2.7 and "ported" to Windows. Add Windows support to call SetErrorMode() and CrtSetReportMode(). _testcapi: add CrtSetReportMode() and CrtSetReportFile() functions and CRT_xxx and CRTDBG_xxx constants needed by SuppressCrashReport.
  • bpo-30705: Fix test_regrtest.test_crashed(). Add which triggers a crash but uses to prevent a crash report from popping up. Modify test_child_terminated_in_stopped_state() of test_subprocess and test_crashed() of test_regrtest to use _crash_python().

I also backported many fixes wrote by other developers, including old fixes up to 8 years old!

Usually, finding the proper fix takes much more time than the cherry-pick itself which is usually straighforward (no conflict, nothing to do). I am always impressed that Git is able to detect that a file was renamed between Python 2 and Python 3, and applies cleanly the change!

Example of backports from master to 2.7:

  • bpo-6393: Fix locale.getprerredencoding() on macOS. Python crashes on OSX when $LANG is set to some (but not all) invalid values due to an invalid result from nl_langinfo(). Fix written in September 2009 (8 years ago)!
  • bpo-15526: test_startfile changes the cwd. Try to fix test_startfile's inability to clean up after itself in time. Patch by Jeremy Kloth. Fix the following support.rmtree() error while trying to remove the temporary working directory used by Python tests: "WindowsError: [Error 32] The process cannot access the file because it is being used by another process: ...". Original commit written in September 2012!
  • bpo-11790: Fix sporadic failures in test_multiprocessing.WithProcessesTestCondition. Fixed written in April 2011. This backported commit was tricky to identify!
  • bpo-8799, fix test_threading: Reduce timing sensitivity of condition test by explicitly. delaying the main thread so that it doesn't race ahead of the workers. Fix written in Nov 2013.
  • test_distutils: Use EnvironGuard on InstallTestCase, UtilTestCase, and BuildExtTestCase to prevent the following warning: Warning -- os.environ was modified by test_distutils
  • Fix test_multprocessing: Relax test timing (bpo-29861) to avoid sporadic failures.

Buildbot reports to python-dev

I also wrote 3 reports to the Python-Dev mailing list: